Zhejiang Lisheng Spring Co.,Ltd
Zhejiang Lisheng Spring Co.,Ltd Quality first, customer to the whole.Honesty is first, service is to the best.
Add to Cart
Single-layer wave washer vs coil spring design guide Carbon / Stainless Steel for quick connector
Description:
Single-turn wave springs are used for several applications, mainly designed for short deflection and low to medium forces. Technology enables to provide a dependable and accurate fit.
The free ends of a wave spring with gap type are allowed for the spring outside diameter grows during compression, which if constrained in a bore prevents binding of comparable stamped wave washers, this design has dramatically improved the fatigue resistance and lifetimes. Thus reduces costs effectively.
Specification:
| Part Number | LR-0050 | LR-0062 | LR-0075 | LR-0087 | LR-0100 | LR-0112 | LR-0125 | LR-0137 | LR-0150 | LR-0162 | LR-0175 | LR-0187 | LR-0200 |
| Operates in Bore Diameter(inch) | 0.5 | 0.625 | 0.75 | 0.875 | 1 | 1.125 | 1.25 | 1.375 | 1.5 | 1.625 | 1.75 | 1.875 | 2 |
| Clears Shaft Diameter(inch) | 0.39 | 0.48 | 0.5 | 0.62 | 0.78 | 0.84 | 0.96 | 1.09 | 1.17 | 1.31 | 1.44 | 1.56 | 1.68 |
| Load(lb) | 7 | 10 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 |
| Work Height (inch) | 0.05 | 0.05 | 0.062 | 0.062 | 0.062 | 0.078 | 0.078 | 0.078 | 0.078 | 0.078 | 0.078 | 0.078 | 0.093 |
| Free Height (inch) | 0.085 | 0.095 | 0.16 | 0.13 | 0.16 | 0.13 | 0.15 | 0.19 | 0.17 | 0.2 | 0.14 | 0.15 | 0.14 |
| Number of Waves | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 |
| Thickness(inch) | 0.008 | 0.01 | 0.01 | 0.012 | 0.012 | 0.016 | 0.016 | 0.016 | 0.018 | 0.018 | 0.018 | 0.018 | 0.024 |
| Radial Wall(inch) | 0.04 | 0.058 | 0.078 | 0.094 | 0.094 | 0.133 | 0.133 | 0.133 | 0.143 | 0.143 | 0.143 | 0.143 | 0.15 |
| Spring Rate (inch/lb) | 200 | 222 | 143 | 235 | 184 | 385 | 306 | 214 | 283 | 230 | 484 | 444 | 723 |
Processing Steps:
Design →Drawing→ Flat the wire → CNC Machining → Heat treatment → Surface → Finishing → Quality Inspection → Packing
Finish:
Oil Dip,Passivation,blacking, zinc/nickel/chrome/silver/gold plating, powder coated etc
