1.MultiWave springs are made of a single filament of round-edged, pre-tempered flat wire from a continuous coil. This results in uniform diameters and wave heights. They replace conventional round wire springs when space is critical, typically occupying only 1/3 to ½ of the compressed height space, while providing more deflection with the same load specifications. 

2.MultiWave springs should be used for all applications requiring tight load deflection specifications where axial space is critical.

Specification:

Part No.	Operates in Bore Diameter	Lears Shaft Diameter	Load	Work Height	Free Height	Waves	Turns	Thinkness	Radial Wall	Spring Rate
Part No.	mm	mm	(N)	mm	mm	Waves	Turns	mm	mm	N/MM
LM60-H1	60	50	450	7.75	11.43	4.5	3	0.76	4.01	122.28
LM60-L1	60	50	135	5.59	11.43	4.5	3	0.46	3.63	23.12
LM60-M1	60	50	275	6.65	11.43	4.5	3	0.61	3.76	57.53
LM60-H2	60	50	450	10.31	15.24	4.5	4	0.76	4.01	91.28
LM60-L2	60	50	135	7.47	15.24	4.5	4	0.46	3.63	17.37
LM60-M2	60	50	275	8.86	15.24	4.5	4	0.61	3.76	43.1
LM60-H3	60	50	450	12.9	19.05	4.5	5	0.76	4.01	73.17
LM60-L3	60	50	135	9.32	19.05	4.5	5	0.46	3.63	13.87
LM60-M3	60	50	275	11.07	19.05	4.5	5	0.61	3.76	34.46
LM60-H4	60	50	450	15.47	22.86	4.5	6	0.76	4.01	60.89
LM60-L4	60	50	135	11.2	22.86	4.5	6	0.46	3.63	11.58
LM60-M4	60	50	275	13.28	22.86	4.5	6	0.61	3.76	28.71
LM60-H5	60	50	450	18.06	26.67	4.5	7	0.76	4.01	52.26
LM60-L5	60	50	135	13.06	26.67	4.5	7	0.46	3.63	9.92
LM60-M5	60	50	275	15.49	26.67	4.5	7	0.61	3.76	24.6
LM60-H6	60	50	450	20.62	30.48	4.5	8	0.76	4.01	45.64
LM60-L6	60	50	135	14.94	30.48	4.5	8	0.46	3.63	8.69
LM60-M6	60	50	275	17.7	30.48	4.5	8	0.61	3.76	21.52
LM60-H7	60	50	450	23.22	34.29	4.5	9	0.76	4.01	40.65
LM60-L7	60	50	135	16.79	34.29	4.5	9	0.46	3.63	7.71
LM60-M7	60	50	275	19.94	34.29	4.5	9	0.61	3.76	19.16
LM60-H8	60	50	450	28.37	41.91	4.5	11	0.76	4.01	33.23
LM60-L8	60	50	135	20.52	41.91	4.5	11	0.46	3.63	6.31
LM60-M8	60	50	275	24.36	41.91	4.5	11	0.61	3.76	15.67
LM60-H9	60	50	450	33.53	49.53	4.5	13	0.76	4.01	28.13
LM60-L9	60	50	135	24.26	49.53	4.5	13	0.46	3.63	5.34
LM60-M9	60	50	275	28.78	49.53	4.5	13	0.61	3.76	13.25
LM60-H10	60	50	450	38.68	57.15	4.5	15	0.76	4.01	24.36
LM60-L10	60	50	135	27.99	57.15	4.5	15	0.46	3.63	4.63
LM60-M10	60	50	275	33.22	57.15	4.5	15	0.61	3.76	11.49

Custom Multi Turn Top Wave Springs Processing For Mechanical Seal

Wave Springs

Single Turn Wave Spring

Nested Wave Spring

Round Wire Wave Springs

Linear Wave Spring

Spiral Retaining Ring

Constant Section Retaining Ring

Wire Snap Ring

Laminar Sealing Rings

Toroflux Flow Rings

Jitter Ring

Custom Multi Turn Top Wave Springs Processing For Mechanical Seal

vertical form seal machine

rotary seal design

mechanical seal assembly procedure